IHSE USA 480c Series Draco tera compact - Manual (Page 138)

Draco tera
138
2013-08-14
5.9 Saving and Loading of Configurations
You have the possibility to set the following administration of
configurations:
Pos: 88 /806-IHSE/Konfiguration/480_Speichern und Laden von Konfigurationen/480-xx/Zwischenspeichern von Konfigurationen @ 7\mod_1309945736118_6.doc @ 54172 @ 3 @ 1
5.9.1 Active Configuration
You have the following possibility to access the menu:
 Select Configuration > Save in the main menu.
By selecting this menu item, the active configuration of the matrix is
saved to the permanent matrix memory. By default, the last
configuration that has been saved in this way will be restored after a
restart of the matrix.
Changing configurations or saving them blocks the matrix memory and
leads to a freeze of all OSD menus for a few seconds. The switching
connections are not affected by this freeze.
If you select Auto Save within the system settings an additional automatic
saving of the configuration will be performed periodically (see Chapter
5.3.2, Page 70).
Pos: 89 /806-IHSE/Konfiguration/480_Speichern und Laden von Konfigurationen/480-xx/Speichern von Konfigurationen (intern) @ 7\mod_1309938789321_6.doc @ 53310 @ 3 @ 1
5.9.2 Saving of Configurations (internal)
In this menu the current matrix configuration to predefined storage
locations is saved. However, it does not replace the buffering of
configuration (see Chapter 5.9.1, Page 138).
You have the following possibilities to access the menu:
In Active, the name and detailed information of the current configuration
are shown. This configuration can be saved now.
In Default and File #1 to File #8, the name and the detailed information of
the respective saved configuration are shown. These storage locations
can be overwritten.