IHSE USA 480c Series Draco tera compact - Manual (Page 42)

Draco tera
42
2013-08-14
3.11 System Check
The System Check offers a diagnostic function for checking your current
matrix configuration. The purpose of this feature is to find suboptimal and
faulty settings and to point these out.
The System Check is exclusively used for a plausibility check and does
not make any active changes in the configuration.
You have the following possibility to access the menu:
The following configuration parts are checked:
 Matrix Firmware
 Extender Firmware
 Multi-Screen Control
 Ext Units
 CPU Devices
 CON Devices
 User
 System Configuration
The following notification levels can be shown:
Level Description
OK (green) System Check completed without any
abnormalities
WARNING (yellow) System Check revealed abnormalities in the
configuration that point out to incomplete parts of
the configuration, firmware differences,
duplications or not connected extenders but
without being system critical
ERROR (red) System Check revealed errors in the configuration
that can have both functional and system critical
influences on the system.
If the messages "WARNING" and "ERROR" are created by the System
Check function, the respective problem will be described and a basic
guideline will be provided.