IHSE USA 480c Series Draco tera compact - Manual (Page 108)

Draco tera
108
2013-08-14
You can select between the following buttons:
Button Function
New Create a new extender unit
Delete Delete an existing unit
Apply Confirm changes of an extender unit
Cancel Reject changes
5.6.1 Creating Flex-Port Extender Unit
Extenders with ID function are automatically recognized by the system
and cannot be created manually. They were used at so called Flex-Ports
at the matrix.
The connection of fixed port extender unit (e. g. USB 2.0) to a Flex-Port
can cause unintended results.
5.6.2 Creating Fixed Port Extender Units
In order to create a fixed port extender unit (e. g. USB 2.0), proceed as
follows:
1. Press the button New.
2. Select, if a template of a USB 2.0 CON unit (USB CON Unit) or
USB 2.0 CPU unit (USB CPU Unit) should be used.
3. Press the button OK.
4. Determine a port at the matrix that should be used with the USB 2.0
extender unit (Fixed Port). As an option the name of the USB 2.0
extender unit can be changed (Name).
5. Press the button Apply to save the new extender unit.
Created extender units are always set as fixed port extenders. These
configurations are necessary, if you want to switch e. g. USB 2.0
connections via the matrix.