IHSE USA 480c Series Draco tera compact - Manual (Page 63)

Configuration
2013-08-14
63
Filter Function
Lists and tables in the Java Tool offer a filter function that allows a fast
and smooth search inside.
1. In order to activate a filter, use the right mouse button to click on the
header of the column that has to be filtered and select Set Filter.
2. Write directly the word or part of a word that has to be filtered into the
header.
The filter results are shown immediately.
3. In order to delete a filter, use the right mouse button to click on the
header of the column that has to be filtered and select Clear Filter.
An active filter is indicated by an asterix in the header.
The filter function is based on the functional principle of common web
search engines.
Offline Configuration
Configuration and system settings via Java Tool can be changed in offline
mode without a direct connection between matrix and Java Tool.
In order to activate a configuration in the matrix, proceed as follows:
1. Select File > Upload in the menu bar.
2. Enter the IP address of the matrix (see Chapter 5.2.3, Page 67) and
the name and password of the user authorization and select the
storage location of the new configuration (default or config01-08) in
the menu Select Configuration.
3. Select Matrix > Connect in the menu bar and enter the IP address of
the matrix and the name and password for user authorization.
4. Select Administration > Activate Configuration in the task area
and select the storage location that has been selected above.
5. Use the button Activate to open the selected configuration within the
matrix.
The connection and the open tab will be closed and the matrix will be
restarted.
During the activation of a configuration, the matrix is temporarily not
available.