IHSE USA 480c Series Draco tera compact - Manual (Page 189)

Troubleshooting
2013-08-14
189
9.4 Malfunction of Power Supply Units
Diagnosis Possible Reason Measure
No power supply
available  Check, if cables for the power
supply are connected correctly
Matrix cannot
be started
Power supply units are
not switched on  Check slide to switch on the
power supply units
Pos: 155 /806-IHSE/Hilfe im Problemfall/Netzwerkstörung/480-xx @ 7\mod_1309944607415_6.doc @ 54133 @ 2 @ 1
9.5 Network Error
Diagnosis Possible Reason Measure
Network
settings are not
assumed after
editing. Restart of the matrix not
yet completed.  Do a restart.
Pos: 156 /806-IHSE/Hilfe im Problemfall/Störung an der Matrix/480-xx @ 7\mod_1309944331383_6.doc @ 54040 @ 2 @ 1
9.6 Failure at the Matrix
Diagnosis Possible Reason Measure
Serial control
impossible or
only restrictedly
possible. Different Baud rate of
CPU and matrix.  Adapt Baud rate in the matrix
and in the CPU (see Chapter
5.3.2, Page 70).
Serial control via
RJ45 port not
possible. Wrong network cable.  Use a crossed network cable
Port definitions
as USB 2.0
invalid. Restart of the matrix not
yet completed.  Do a restart.
Pos: 157 /806-IHSE/Hilfe im Problemfall/Bildausfall/480-xxC @ 8\mod_1345797708512_6.doc @ 68242 @ 2 @ 4