beautypg.com

2 scan mode, 3 function keys

Page 158: Keys

background image

Draco tera

158

2013-08-14

Pos: 106 /806-IHSE/Betrieb/Bedienung über HotKeys/480-xx/Scan-Modus @ 7\mod_1309940746290_6.doc @ 53508 @ 3 @ 1

6.1.2 Scan Mode

The Scan Mode offers the possibility to show video signals of the different
CPU favorites fast and without delay and offers switching in between
without continuously using the 'Hot Key'. The switching between two video
signals can even take place within one frame.

1. Start command mode with the 'Hot Key'. For control, the LEDs Shift

and Scroll flashes at the keyboard, if command mode is activated.

2. Press the key and hold it down. You can now enter the

index numbers of the various CPUs from the list of favorites with the
keyboard and immediately switch to the video signal of the respective
CPU after entering the index number.

3. Leave Scan Mode by pressing + .

Optimal results can be achieved by the use of as identical resolutions as
possible. This contributes to a smooth and seamless function of the scan
mode.


Pos: 107 /806-IHSE/Betrieb/Bedienung über HotKeys/480-xxC_Funktionstasten - @ 8\mod_1345793800423_6.doc @ 68021 @ 3 @ 4

6.1.3 Function Keys

In Command Mode you can retrieve the macros 1–16 with the function
keys of the connected standard keyboard instead of the
special macro keyboard.

The deposited command sequence for the appropriate function key is
executed and Command Mode is left immediately.

Regarding macros there is no necessity of using the key for
confirmation.


Pos: 108 /806-IHSE/zz_Layout/Seitenumbruch @ 8\mod_1348581820516_0.doc @ 69462 @ @ 1