Guralp Systems CMG-DCM - Manual (Page 99)

Operator's guide
the net.mail.out.type drop-down menu and ignore the remaining
settings.
Not all DCMs have mail capabilities installed.
net.mail.out.authsmtp : Select yes and give a username and password
in the fields below to use authenticated SMTP for outgoing mail.
net.mail.out.password : The password needed to log in to the outgoing
mail server, if using authenticated SMTP.
net.mail.out.server : The hostname or IP address of the outgoing mail
server.
net.mail.out.tls : Select yes to encrypt the outgoing mail channel with
TLS, no to leave communications unencrypted.
net.mail.out.type : Select smtp to use that protocol to send mail to the
server. Currently only SMTP is supported. If you do not need the DCM
to be able to send mail, select None.
net.mail.out.username : The username needed to log in to the outgoing
mail server, if using authenticated SMTP.
6.10 Remote access
The settings on this page determines which ways you can use to access
the DCM over a TCP/IP network.
December 2006 99