Guralp Systems CMG-DCM User Manual
Page 92

CMG-DCM Data Communications Module
SEED format. The DCM will only write SEED volumes for streams
mentioned in this file.
Clicking SEED configuration brings up a page in the work area which
enables you to edit the file and its attributes directly.
The Web interface does
not check that the content of the files will be
understood. You should ensure that the file is valid before committing
any changes.
The format of the file is as follows:
HPA1Z2:::::CMG-3_120S_50HZ:CMG-DM24mk3:V9.800E-01:1.6E-07:46
HPA1N2:::::CMG-3_120S_50HZ:CMG-DM24mk3:V9.400E-1:1.6E-07:46
HPA1E2:::::CMG-3_120S_50HZ:CMG-DM24mk3:V1.050E00:1.6E-07:46
Each line represents an incoming stream from the digitizer; the fields
are separated by colons, and are in turn:
•
the digitizer's stream ID;
•
a SEED network name for the array (or leave blank to have the
DCM generate one automatically);
•
a SEED station name for the station (or leave blank to have the
DCM generate one automatically);
92
Issue F