Guralp Systems CMG-DCM - Manual (Page 98)

CMG-DCM Data Communications Module
net.mail.in.port : The number of the port to connect to on the mail
server. This generally depends on the protocol used to retrieve mail:
•
For pop3 mail, this port will normally be 110, or 995 for secure
POP3 over TLS (transport-layer security).
•
For imap mail, this port will normally be 143, or 993 for secure
IMAP over TLS.
net.mail.in.server : The hostname or IP address of the mail server.
net.mail.in.tls : Select yes to encrypt the incoming mail channel with
TLS, no to leave communications unencrypted.
net.mail.in.type : Select pop-3 or imap to use that protocol to retrieve
mail from the server. If you do not need the DCM to be able to receive
mail, select
None.
net.mail.in.username : The username needed to log in to the mail
server.
6.9 Outgoing mail setup
This page enables you to send mail from the DCM using the SMTP
protocol. Both authenticated ( i.e. sending a username to the server)
and unauthenticated SMTP are supported, as is encryption using TLS
(transport-layer security.)
If you do not need the DCM to be able to send mail, select None from
98 Issue F