Guralp Systems CMG-DCM - Manual (Page 26)

CMG-DCM Data Communications Module
Slide the disk out and replace with another Lacie U&I drive, or
any brand of IDE / USB or IEEE 1394 2.5” drive you specify (at
the time of manufacture). You can do this at any time without
losing data.
7. Plug the hard disk into any computer that supports the USB
Mass Storage standard using a standard USB cable. Newer Linux
distributions and Microsoft Windows XP have this enabled by
default.
In Windows XP, you should see a series of Found new
hardware messages indicating that the drive has been
recognised. A new disk drive icon should appear in
My
Computer:
26 Issue F