Guralp Systems CMG-DCM - Manual (Page 79)

Operator's guide
5.9 HTTP server
In addition to configuring the DCM and instruments attached to it, you
can also instruct the on-board Web server to provide data to network
clients.
datatransfer.http.server : Select on if you wish to be able to retrieve
data from the DCM over the Web ( i.e. HTTP). Once the HTTP server is
enabled, you can browse through the DCM's hard disk using the URL
http://mydcm/cgi-bin/explorefs?path=/ .
You will need to use your username and password to access this
service.
December 2006 79