Guralp Systems CMG-DCM - Manual (Page 97)

Operator's guide
net.dns.search : If the DCM encounters an unqualified hostname in
any of its configuration settings, or in a command, it will look for that
name in each of the domains specified here in turn. You should give
the domains to search in their correct order, separated by commas. The
DCM's own domain (as given in the
net.dns.domain setting) will
always be searched first, so you need not specify it here.
net.dns.server.0 : The IP address of the primary nameserver used to
resolve host names. If you are using
dhcp/bootp, the DNS service is
negotiated automatically, and so this setting may be ignored.
net.dns.server.1 : The IP address of the secondary nameserver. Again,
you may be able to ignore this setting if you are using
dhcp/bootp.
6.8 Incoming mail setup
This page enables you to set up the DCM to retrieve e-mail from a
POP3 or IMAP server on the network, either unencrypted or secured
using TLS (transport-layer security.)
If you do not need the DCM to be able to fetch mail, select None from
the net.mail.in.type drop-down menu and ignore the remaining
settings.
Not all DCMs have mail capabilities installed.
net.mail.in.password : The password needed to log in to the mail
server.
December 2006 97