Greenheck AMD-xx-TD Transmitter User Manual
Page 33
33
Appendix A
BACnet Standardized Device Profile (Annex L)
BACnet Operator Workstation (B-OWS)
BACnet Building Controller (B-BC)
BACnet Advanced Application Controller (B-AAC)
X
BACnet BACnet Applicatioon Specific Controller (B-ASC)
BACnet Smart Sensor (B-SS)
BACnet Smart Actuator (B-SA)
List of all BACnet Interoperability Building Blocks supported (see Annex K in BACnet Addendum 135d)
- DS-RP-B ............Read Property
- DS-WP-B ...........Write Property
- DM - DDB-B ......Dynamic Device Binding
- DM-DOB-B ........Dynamic Object Binding
- DM-DCC-B ........Device Communication Control
- DM-RPM-B ........Read Property Multiple
- DM-RD-B ...........Reinitialize Device
Which of the following device binding methods does the property support? (check one or more)
Send Who-is, receive I-Am (BIBB DM-DDB-A)
X
Receive Who-is, send I-Am (BIBB DM-DDB-B)
Send Who-Has, receive I-Have (BIBB DM-DOB-A)
X
Receive Who-Has, send I-Have (BIBB DM-DOB-B)
Manual configuration of recipient device’s network number and MAC address
None of the above
Analog Input Object Type
No Dynamically creatable using BACnet’s CreateObject Service?
No Dynamically deletable useing BACnet’s DeleteObject Service?
List of “Required” Properties Supported
X
PROP_OBJECT_IDENTIFIER
X
PROP_OBJECT_NAME
X
PROP_OBJECT_TYPE
X
PROP_PRESENT_VALUE
X
PROP_STATUS_FLAGS
X
PROP_EVENT_STATE
X
PROP_OUT_OF_SERVICE
X
PROP_UNITS
The Greenheck BACnet stack supports the optional property “PROP_DESCRIPTION”. This is used to indicate the
type of information in the object. For example, for an Vari-green system, the description will indicate as “AF0” for
average flow, or “AT0” for average temperature. If the object belongs to a sensor in the system, it will be indicated
as “STn” or “SFn”, where n is the sensor address. The Greenheck Device which supports BACnet will determine
the amount of AI objects available. For an Vari-green system, the amount of AI objects is determined by the total
number of sensors in the system x 2 with an additional 2 AI objects for system average flow and system average
List of “Optional” Properties Supported
X
PROP_DESCRIPTION