Greenheck AMD-xx-TD Transmitter - Manual (Page 26)

26
1. While in Supervisor Menu, use UP or DN to scroll to:
2. Press ENT to enter Supervisor password menu. Display will indicate:
3. Press ENT and display will indicate current password.
4. Use UP or DN to change password. Once desired password is displayed, press ENT. New password will be
stored in memory and display will return to previous menu (see Step 2).
Caution: If password is changed, write it down, and retain in case it is forgotten.
Note: If user desires not to change password and return to password menu, press ESC. Unit will remain
programmed as it was originally.
5. Use UP to select Bypass Password if desired.
6. Follow Steps 3 and 4 to make changes.
7. To return to Main Menu, select Return to MAIN MENU in the Supervisor Password Selection menu, and press
ENT.
SUPERVISOR PASSWORD
SELECTION
PASSWORD
SELECTION
6.2 – Supervisor Password Selection
Allows the selection of a Supervisor Menu password, and the option of bypassing the password.
- Password Selection
- Bypass Password? Selection
- Return to MAIN MENU
Password
2,222
Return to
MAIN MENU
Bypass Password?
NO
0-9,999
NO or YES
- SUPERVISOR MENU EXIT
Supervisor Password Select
- Sensor Management
Operator Menu
Password Menu
Default selection shown Available selections
Note: From the Factory, password is set for 1,111