Greenheck AMB Series External Mount (468753) - Manual

Installation Instructions
Belimo Actuators Direct Drive Series
(AMB, FSLF, LF, LMB, NMB, TF)
UL Listed Direct Drive Actuator
These instructions apply to the external field installation of Belimo actuators on Greenheck model VCD Control Dampers when
they are duct mounted or sleeved. For severe environment actuator kits, reference page 3 & 4.
Tools Required:
Wrenches:
(1) 3 /
8
in., (1) 7 /
16
in., and (1) 10mm
Part number 468753
! !
CAUTION
Device Malfunction Hazard. Improper set screw tightening causes device malfunction. Tighten set screws
with proper torque to prevent damper shaft slippage.
! !
WARNING
Equipment Damage or Electrical Power Hazard. Line voltage can cause death or serious injury and short
equipment circuitry. Disconnect power supply before installation.
Item Part No. Qty Description
1 1 Belimo actuator
2 723092 1 Anti-rotation bracket
3 815027 1 Standoff bracket
4 415475 4 1/4 -20 x 1/2" bolt
5 415455 4 1/4-20 spinlock nut
6 415586 4 #14 TEK screw
7 416122 1 Anti-rotation pin
8 415385 1 Keps hex nut zp.
Actuator (representation)