Greenheck AMD-xx-TD Transmitter - Manual (Page 27)

27
1. While in Operator Menu, use UP or DN to scroll to:
2. Press ENT to enter Sensor Management menu. Display will indicate:
3. Press ENT to enter Sensor Management menu. Display will indicate:
*The number of Active Sensors is unique to each application.
4. Press ESC or ENT to return to previous menu (Step 2).
5. Press UP. Display will indicate:
6. Press ENT. Display will indicate:
Display will indicate all enables sensors on the bar graph by darkened area under their respective #, and total
number of enabled sensors will be displayed at the bottom.
7. Press ESC to return to previous menu (see Step 5).
8. Press UP and display will indicate:
6.3 – Sensor Management
1 8 16 24 32
Sensors Found: 8
Total Sensors: 8
Sensor
Management
Display Enabled
Sensors
Enable Sensor
Selection
Operator Menu
Ping Sensor
1
SENSOR FOUND
Sensor Management Menu
- Scan Network for Sensors
- Display Enabled Sensors
- Enable Sensor Selection
- Disable Sensor Selection
- Ping Sensor Selection
- Return to MAIN MENU
- Supervisor Password Select
Sensor Management
- Diagnostic Display Selection
Default slection shown
Available selections:
1 to 32 1
1 to 32 1
1 to 32 1 , EXIT
Return to
MAIN MENU
SENSOR FOUND
or
SENSOR NOT FOUND
1 8 16 24 32
Sensors Found: 6
Xmitter Total: 1
1 8 16 24 32
Enabled Sensors : 6
Xmitter Total: 1
1 8 16 24 32
Enabled Sensors : 6
Enable Sensor: 1
1 8 16 24 32
Enabled Sensors : 6
Disable Sensor: 1
Scan Network
for Sensors
1 8 16 24 32
Sensors Found: 8
Total Sensors: 8
*