Greenheck AMD-xx-TD Transmitter - Manual (Page 14)

14
Units List for Volume
Unit of Measurement Display
Actual cubic feet per minute ACFM
Actual cubic feet per hour ACFH
Actual liters per second Al/s
Actual liters per minute Al/m
Actual cubic meters per hour Am3/h
Standard cubic feet per minute SCFM
Standard cubic feet per hour SCFH
Standard liters per second Sl/s
Standard liters per minute Sl/m
Standard cubic meters per hour Sm3/h
4. Use UP or DN to change setting. Once desired setting is displayed, press ENT, new setting will be stored in
memory and display will return to Flow Configuration menu as in Step 2.
Note: If user desires not to change the setting and return to the Flow Configuration menu, press ESC. Unit will
remain programmed as it was originally.
5. Use UP or DN to select remaining parameters to be changed within the Flow Configuration menu.
6. Follow Step 4 to make any changes to parameters.
See the following Units List for the available selections for the appropriate Flow Type.
7. To return to the Main Menu, select Return to MAIN MENU in the Flow Configuration menu and press ENT.
5.9 – DISPLAY CONFIGURATION
Allows selection of display parameter for lines 2 and 3. Also, the level of filtering, 0 through 5 (5 is the maximum) can
be selected by User.
- Display Filter Selection
- Line 2 Parameter Selection
- Line 2 Custom Text Selection 1
- Line 3 Parameter Selection
- Line 3 Custom Text Selection 1
- Return to MAIN MENU
Display Filter
0 (None)
Line 3 Parameter
VELOCITY
Line 3 Custom Text
Return to
MAIN MENU
Line 2 Parameter
TEMPERATURE
Line 2 Custom Text
0 (None) to
5 (Maximum)
TEMPERATURE,
CUSTOM TEXT,
or VELOCITY
See ASCII
Character Chart for
Selection
See ASCII
Character Chart for
Selection
TEMPERATURE,
CUSTOM TEXT,
or VELOCITY
- Flow Configuration
Display Configuration
- Output 2 Parameter Selection
Operator Menu
Display Configuration Menu
Default selection shown Available selections
1 Available only if Parameter is
CUSTOM TEXT.