Greenheck AMD-xx-TD Transmitter - Manual (Page 12)

12
Note: All selections that are available for further configuration programming will have an “arrow” symbol
displayed in the right side of the display field. Those that are not available for further configuration
programming will not have the “arrow” symbol displayed and will display Not Installed beneath the selection
description. Example:
The remainder of this Section details steps to verify or change Configuration Programming of all Operator Menu
Selections.
5.7 – OPERATOR PASSWORD SELECTION
Allows the selection of an Operator Menu password and the option of bypassing the password.
Note: The Operator Password menu can be accessed directly following start-up (power ON) by pressing:
UP then DN then UP then ESC.
1. While in Operator Menu, use UP or DN to scroll to:
2. Press ENT to enter Operator password menu. Display will indicate:
3. Press ENT and display will indicate current password.
4. Use UP or DN to change password. Once desired password is displayed, press ENT. New password will be
stored in memory and display will return to previous menu (see Step 2).
Caution: If password is changed, write it down, and retain in case it is forgotten.
Note: If user desires not to change password and return to password menu, press ESC. Unit will remain
programmed as it was originally.
5. Use UP to select Bypass Password if desired.
6. Follow Steps 3 and 4 to make changes.
CAUTION: If YES is selected, this will eliminate the need to enter any password when accessing the Operator Menu.
7. To return to Main Menu, select Return to MAIN MENU in the Operator Password Selection menu, and press ENT.
Network option is
not installed
- Password Selection
- Bypass Password? Selection
- Return to MAIN MENU
Password
1,111
Bypass Password?
NO
Return to
MAIN MENU
0 to 9,999
NO or YES
- OPERATOR MENU EXT
Operator Password Select
- Flow Configuration
Operator Menu
Password Menu
Default selection shown Available selections
Operator Password
Selection
Password
Selection
Note: From the Factory, password is set for 1,111