Gasboy Fuel Point Dispenser - Manual (Page 7)

03/28/03 1-1
Section 1
INTRODUCTION
PURPOSE
The GASBOY Fuel Point Dispenser and Hose Retrofit Installation Manual is provided to assist you
in installing the Listed dispenser retrofit kits for the Fuel Point system on your pumps. This manual
should be supplied to the installer prior to installation to ensure your components are installed
properly. Faulty installations are the major cause of system malfunctions. The system
components must be installed as described in this manual to ensure the reliability and proper
operation of the system. Please read this entire manual before starting installation.
GASBOY provides a toll-free number for customers and installers having any questions pertaining
to the installation: 1-800-444-5529
SYSTEM OVERVIEW
Fuel Point adapts to Listed GASBOY fuel management systems for hassle-free fueling. System
applications determine actual components required. Your system may consist of several or all of
the following components:
•
a GASBOY fuel management system (FMS) (Listed models 1000, 1000P, or 2000S CFN)
•
Fuel Point Reader (FPR)
•
Pumps/dispensers modified using Listed Dispenser and Hose Retrofit Kits (consisting of I/S
Pre-amp and one or two kits)
•
Vehicles equipped with materials from Vehicle Installation Kits (See Manual C35699)
•
Vehicle Module(s) (VM’s)