Gasboy M06245K0XX - Manual (Page 17)

MDE-4506A Atlas™ Pulser Kits M06245K0XX Installation · May 2006 Page 17
Installing the Pulser Kit in Single Unit and 9140 (Kits M06245K004 through M06245K007 and M06245K009 - M06245K011)
Completing the Assembly and Mounting the Pulser Unit on Models 8700
and 9100 except 9140
1 In the kit, locate the parts shown in Figure 9 .
2 Feed the pulser and coupling assembly wires through the 025015 elbow and install the elbow
on the pulser and coupling assembly. For Kit M06245K004, M06245K005 and M06245K006,
refer to the illustration below.
Figure 9: Single Volume Mechanical Pulser Conduit
Bushing, Reducing
3/4-1/2 (K49827)
Conduit Nipple 1/2x 4
(R11976-57)
Conduit Tee 1/2
inch NPT (064830)
Elbow, Conduit 1/2x
45 (025015)
Union, conduit 1/2
inch (Q10016-04)
Formed conduit
Mechanical volume
pulser grade1
(M05292B001)
Conduit elbow 1/2
NPT 90 deg
(K42428)
Conduit Nipple
1/2x 1 5/8 (R11976-43)
Elbow, Conduit 1/2x
90 deg (025045)
Pipe plug c-sunk 1/2
(K43850
Union, conduit 1/2
inch (Q10016-04)
Spacer (056895)
Spacer 0.944
(056877, 056895)