DNF Controls CP20 - Manual (Page 37)

Flex Control Network ® , CP20 User Manual Page 33 of 42
7.
8.
Shotbox Functions
NOTE: Using the ST420 Shotbox with the CP20 Control Panel requires the following
software versions:
CP20: V6.23A or later
ST420: V4.14 102910 or later
[PLAY]: Plays out the selected clip.
[RECUE]: Returns to the beginning of the clip.
[STOP]: Stops playout of the clip.
[LEARN]: Press to initiate the shotbox learn function.
[ESC]: Cancel an activated function.
Shotbox Shotkey Mapping of Cue Point Locations
The Shotkeys on the Shotbox access the cue point locations in the CP20 as follows:
BANK 0, Shotkeys 1 -> 30 access cue point locations 001 - 030.
BANK 1, Shotkeys 1 -> 30 access cue point locations 101 - 130.
BANK 2, Shotkeys 1 -> 30 access cue point locations 201 - 230.
BANK 3, Shotkeys 1 -> 30 access cue point locations 301 - 330.
BANK 4, Shotkeys 1 -> 30 access cue point locations 401 - 430.
BANK 5, Shotkeys 1 -> 30 access cue point locations 501 - 530.
BANK 6, Shotkeys 1 -> 30 access cue point locations 601 - 630.
BANK 7, Shotkeys 1 -> 30 access cue point locations 701 - 730.
BANK 8, Shotkeys 1 -> 30 access cue point locations 801 - 830.
BANK 9, Shotkeys 1 -> 30 access cue point locations 901 - 930.