DNF Controls CP20 - Manual (Page 23)

Flex Control Network ® , CP20 User Manual Page 19 of 42
IP ADDRESS DISPLAY: {ON}: Show IP address on LCD display
{OFF}: Do NOT show IP address on LCD display
(recommended)
REC KEY:
{REC}: Press only the REC key to start record.
{REC + PLAY}: Press and hold REC and then press
PLAY to start record.
PREROLL
Press the [Channel] key and then press {CHANGE}.
Use the numeric keypad to enter the new value. Press
[ENTER] to save the new value. Each Channel has its
own PREROLL value.
POSTROLL
For CAPTURE Function only. Set amount of postroll past
OUT point.
Press the [Channel] key and then press {CHANGE}.
Use the numeric keypad to enter the new value. Press
[ENTER] to save the new value. Each Channel has its
own POSTROLL value.
FAT-IN
For CAPTURE Function only. Set amount of record pad
before IN point.
Press the [Channel] key and then press {CHANGE}.
Use the numeric keypad to enter the new value. Press
[ENTER] to save the new value. Each Channel has its
own FAT-IN value.
FAT-OUT
For CAPTURE Function only. Set amount of record pad
after OUT point.
Press the [Channel] key and then press {CHANGE}.
Use the numeric keypad to enter the new value. Press
[ENTER] to save the new value. Each Channel has its
own FAT-OUT value.
GANG SYNC:
Used to GANG devices located on multiple DC20 Device
Controllers.
{No LTC + Ref Video}: GANG play and record will NOT
be frame accurate across devices connected to different
DC20s.
{With LTC + Ref Video}: GANG play and record will be
frame accurate across devices connected to different
DC20s.
NETWORK DELAY: Only required when doing frame accurate GANG Play
across devices connected to different DC20s. Please
contact DNF Customer Support prior to changing.
GANG NETWORK
DELAY: View the network delay of each ganged channel.