Load a cue point – DNF Controls CP20 User Manual
Page 29
Flex Control Network
®
, CP20 User Manual
Page 25 of 42
H. Load a Cue Point
LOAD KEY = LOAD
1) Press [NEXT] or [LAST] key or enter cue number and press [ENTER] on the
keypad
2) Press the [LOAD] key. The VTR will be cued to the set in point.
OR
If the Cue was saved as a "LEARN" then:
Press [SHIFT] + [LOAD] key. All the VTRs that were learned will
be loaded and cued to their in points as well as the learned GANG
states.
LOAD KEY = RECALL
1) Press [NEXT] or [LAST] key or enter cue number and press [ENTER] on the
keypad
2) Press the [LOAD] key. All the VTRs that were learned will be loaded and cued
to their in points as well as the learned GANG states.
OR
If the Cue was saved as a "MARK" then:
Press [SHIFT] + [LOAD] key. The VTR will be cued to the set in point.
LOAD KEY = REDIRECT
1) Press [NEXT] or [LAST] key or enter cue number and press [ENTER] on
the keypad
2) Press the [LOAD] key.
3) The screen will display softkeys to select the alternate pairs of VTR channels
{
1,2
}
; {3,4}; {5,6}; {7,8} to which to load the CUE POINT. The VTRs will
be loaded from channels 1 & 2 to the selected pair of channels and cued to
the set in point.
OR
If the Cue was saved as a "LEARN" then:
1) Press [SHIFT] + [LOAD] key. (All the VTRs that were learned will be loaded
and cued to their in points as well as the learned GANG states).
2) The screen will display softkeys to select the alternate pairs of VTR channels:
{
1,2
}
; {3,4}; {5,6}; {7,8} to which to load the CUE POINT. The VTRs will
be loaded from channels 1 & 2 to the selected pair of channels and cued to
the set in point.
3) All the VTRs that were learned will be loaded and cued to their in points as
well as the learned GANG states.