DNF Controls 2044CL_(-A, -O, -NX, -7, -8, -T, -P) User Manual
User manual
12843 Foothill Blvd. Suite C
Sylmar, California 91342
V: 818.898.3380
F: 818.898.3360
[email protected]
MODEL NO. 2044CL
300 CLIP INSTANT ACCESS
SYSTEM
AMP Protocol (A)
ODETICS Protocol (O)
NEXIO Protocol (NX)
(-A, -O, -NX, -7, -8, -T, -P)
User Manual
Rev. 1.05
This manual is related to the following products:
Table of contents
Document Outline
- TABLE OF CONTENTS
- REVISION HISTORY
- GETTING STARTED . . .
- SYSTEM DESCRIPTION
- SYSTEM INSTALLATION
- CONNECTION DIAGRAM
- VIDEO SERVER SETUP
- Select the communications protocol on the VIDEO SERVER to be
- Assign a serial port on the VIDEO SERVER through which the S
- NOTES: OPERATIONS . . .
- LOAD A CLIP ON THE ST400
- Select a VTR by pressing VTR [1], [2], [3], [4], [5], or [6]
- Press [CLIP LIST] to view the list of CLIP IDs that are resi
- Repeat steps A. - B. to load clips on desired VTRs.
- PLAY CLIP SEGMENT
- SET IN AND OUT POINTS
- Press VTR [1], [2], [3], [4], [5], or [6] ({7 } or {8} on -7
- Load a clip on the selected channel. See Section: 5; LOAD A
- Use the transport functions to view the clip.
- LEARN A CLIP OR A CLIP COMBINATION
- BVW MODE
- ON THE ST400
- Press VTR [1], [2], [3], [4], [5], or [6] ({7 } or {8} on -7
- Load a clip on the selected channel. See Section: 5; LOAD A
- Use the transport functions to view the clip.
- For GANGs, repeat steps 1) thru 3) for each channel.
- Select the desired Cue Point by pressing [NEXT CUE], [LAST C
- Press [SHIFT] + [MARK] to initiate the LEARN.
- Select the VTRs to learn by pressing VTR keys [1], [2], [3],
- Press [MARK] to complete the learn process.
- The ST400 will: LEARN (save) the VTR number (1, 2, 3,4,5,6,
- ON THE SHOTBOX
- RECALL A CLIP OR CLIP COMBINATION
- RECUE CLIP
- CLEAR CUE POINTS
- LOOP CLIP ON THE ST400
- Load a clip on the selected channel. See section: 5; LOAD
- Optional: Set an IN Point and/or OUT Point.
- Press [RECUE] to assure that clip is parked within IN & OUT
- Press [LOOP ENABLE].
- TIMECODE SEARCH
- Press [SHIFT] + [RECUE].
- Enter the desired timecode number.
- Press [ENTER] to search to timecode number.
- VIEW COUNTDOWN TIME (AMP PROTOCOL ONLY)
- Press {RT} softkey to enable the countdown mode on the curre
- The countdown time is displayed on the first line of the dis
- If the OUT point is marked and the playout continues passed
- Press {RT} softkey to disable the countdown mode on the curr
- BVW MODE
- CREATING A CLIP
- Press [CLIP LIST].
- Press {CREATE}.
- Manually enter an ID with a maximum of 32 characters from th
- Optional: Press [ENTER] to enter the start time/duration for
- Press {CREATE}.
- Press [REC] to start the record process. The channel will s
- CAPTURE
- Press VTR [6] to initiate the Capture function.
- Set an IN point on the SOURCE VTR.
- Set an OUT point on the SOURCE VTR.
- Press [SHIFT] + [RECORD].
- CREATE A SUBCLIP (AMP, OR NX ONLY)
- Load a clip as described in Section 5, LOAD A CLIP.
- Mark (enter) an IN and/or OUT point. Note: At least one poi
- Press [SHIFT] + [CLIPLIST].
- Enter a new clip name using a PC keyboard or a numeric keypa
- Press {CREATE}.
- The new clip is created in the working directory. The new c
- CREATE CUE POINT LABELS
- Select cue point to label.
- Press the [LABEL] key.
- Manually enter a label, up to 12 characters in length, using
- Press the [LOAD] shotkey on the Shotbox to assign the entere
- SELECT A WORKING DIRECTORY (AMP ONLY)
- Press [MENU] key.
- The Working Directory Option shows the currently selected wo
- Turn the wheel until this option is highlighted.
- Press {CHANGE} softkey.
- A Window with the list of directories residing on the server
- Turn the wheel to highlight the desired directory.
- Press [LOAD] to make the highlighted directory your current
- Press [ESC] to exit menu mode.
- SHOTBOX CONTROL SWITCHES
- [PLAY]: Plays out the selected clip.
- [RECUE]: Returns to the beginning of the clip.
- [STOP]: Stops playout of the clip.
- [LEARN]: Press to initiate the shotbox learn function.
- [VIEW]: Press and hold + SHOTKEY to view VTR channel assignm
- [ESC]: Cancel an activated function.
- SHOTBOX SHOTKEY MAPPING OF CUE POINT LOCATIONS
- VIEW SHOTKEY ASSIGNMENTS ON THE SHOT BOX
- Press and hold [VIEW]. The VIEW LED indicator will turn on.
- Select the desired BANK by pressing the appropriate bank key
- Press and hold the desired Shotkey.
- The LCD display on the Shotkeys will show the current assign
- Release the Shotkey and [VIEW] when done viewing.
- Repeat steps A. through E. for other shotkeys.
- OPTIONS . . .
- REFERENCE . . .
- SETUP MENU
- FUNCTION TABLE
- SPECIFICATIONS
- TROUBLESHOOTING
- KEY LAYOUT
- DNF CONTROLS LIMITED WARRANTY