DNF Controls CP20 - Manual (Page 20)

Flex Control Network ® , CP20 User Manual Page 16 of 42
View System Logs
The default password, when shipped from the factory, is “controls”, all lower
case. The password is used to access all configuration screens.
Using the web browser-
1) From the Home Page, click on the “System” link. The System page will be
displayed.
2) Click on “System Maintenance” Link, the System Maintenance page will be
displayed.
3) Click on “View System Logs” Link, the System Logs File List page will be
displayed.
4) Double click on the file name to view the file.
5) Right click on the file name to “Save As” the file to the PC.
6) Click on any menu link to exit the View Page Mode.
7) Click on the radio button to select the file for deletion. Then click the Delete
button to delete the selected file.
8) Click on the Back button to exit without deleting the file.
System Snapshot
The default password, when shipped from the factory, is “controls”, all lower
case. The password is used to access all configuration screens.
Using the web browser-
1) From the Home Page, click on the “System” link. The System page will be
displayed.
2) Click on “System Maintenance” Link, the System Maintenance page will be
displayed.
3) Click on “System Snapshot” Link, the View System Snapshot page will be
displayed.
4) Click the “Display on Screen” radio button or “Send to File” radio button Then
click on the submit button to perform the selected function. The snapshot will
show the system configuration. This is primarily for diagnostic purposes.