DNF Controls CP20 - Manual (Page 17)

3) Click on the “Edit Channel Assignment Table” link at the bottom of the page.
The Edit Channel Assignment Table will be displayed.
4) Click in the Remote IP address field and enter the IP address of the DC20
device controller. Click on the arrow of the dropdown box and select the
remote channel to be connected.
5) Repeat the previous step for each VTR channel.
6) At the bottom of the table enter the IP address for the primary and backup
CUE SERVER (DC20).
7) If used, in the PBIO field, enter the IP address of the DC20 to which the
production switcher is attached.
8) Click on “Save” to save the entered data.
OR
Click on “Back” to exit without saving.
Flex Control Network ® , CP20 User Manual Page 13 of 42
G. Additional Setups
No additional setups are required in “System Maintenance” for normal operation.