DNF Controls CP20 - Manual (Page 30)

Flex Control Network ® , CP20 User Manual Page 26 of 42
I.
J.
K.
Recue
Press [GOTO]. If an IN Point is set (the IN indicator is on), the VTR will RECUE
to the IN Point. If no IN point is set then do nothing.
Search to
1) Press [SHIFT] + [GOTO] then enter the search point on the keypad and press
[ENTER] to cue to the entered time.
2) Press [SHIFT] + [IN] then [GOTO] will cue to the in point.
3) Press [SHIFT] + [OUT] then [GOTO] will cue to the out point.
Preroll
Press [PREROLL] to cue to the amount of time preset in the menu before the
current position. If an IN point was set it will cue to the preset amount before
the in point.