DNF Controls CP20 - Manual (Page 14)

Flex Control Network ® , CP20 User Manual Page 10 of 42
D. Set DNF Port Number
The DNF Port Number is only changed from it default value (50000) when
required to pass through customer firewalls. Please consult your IT department
for a port number value. This setting must match the Port Number setting on all
Flex Control Network units that this product will connect to.
Using the web browser-
1) From the Home Page, click on the “System” link. The System page will be
displayed.
2) Click on “Set DNF Port Number”. The Set DNF Port Number page will be
displayed.
3) Enter a valid number corresponding to the current system.
4) Click on “Save” to save the entered DNF port number.
OR
Click on “Back” to exit without saving.