DNF Controls CP20 - Manual (Page 36)

Flex Control Network ® , CP20 User Manual Page 32 of 42
N.
O.
Preroll
Press [PREROLL] to cue to the amount preset in the menu before the current
position. If an in point was set it will then cue to the preset amount before the in
point.
Create a clip
1) Press [CLIP LIST].
2) Press [CREATE].
3) Manually enter an ID from the CP20 numeric keypad.
OR
Manually enter an ID from a PC keyboard.
4) Press [LOAD]. The clip will be created and loaded. If the entered CLIP ID
already exists, a warning message will be displayed.
5) To load the existing clip, press [ENTER].
6) Press [REC] or [REC] + [PLAY] keys to start the record process.
OR
7) Press [ESC] to exit without loading the existing clip.