DNF Controls CP20 - Manual (Page 24)

Flex Control Network ® , CP20 User Manual Page 20 of 42
CURRENT IP ADDRESS: View current IP Address. Press softkey to change the
displayed address. Use keypad to enter new address.
The system must be rebooted for the new setting to
take effect.
CURRENT SUBNET
MASK:
View current Subnet Mask. Press softkey to change the
displayed mask address. Use keypad to enter new
address. The system must be rebooted for the new
setting to take effect.
CURRENT GATEWAY: View current Gateway. Press softkey to change the
displayed gateway address. Use keypad to enter new
address. The system must be rebooted for the new
setting to take effect.
CHANNEL: Assign devices to the CP20 channel keys.
Press {<-} or {->} keys to select the CP20 channel.
Press {EDIT} Then:
Press {IP} to select DC20, use keypad to enter
IP address. Use {<-} or {->} to position
cursor on IP address field.
Press {CH} to select DC20 device port number.
Use keypad to enter Channel number.
Press {SAVE} to assign device to CP20
channel.
Press {UP} to return to CHANNEL assignment
menu.
Press {LBL} to list all available devices.
Turn wheel to select device then press [ENTER]
to assign device to CP20 channel.
CHANNEL ASSIGNMENT
TABLE:
{BACKUP}: Save the current Channel Assignments to a
file. Enter a file name using the numeric keypad. Or, turn
the wheel to select and overwrite an existing file. Press
[ENTER] to complete the save.
{RESTORE}: Replace the current Channel Assignments
with those saved in the selected file. Enter a file name
using the numeric keypad. Or, turn the wheel to select an
existing file. Press [ENTER] to restore the selected file.
LTC SNAPSHOT: Diagnostic only.
No LTC Signal: there is no LTC signal connected to the
CP20.
{REFRESH}: Press softkey to refresh the reading.