DNF Controls CP20 - Manual (Page 11)

Flex Control Network ® , CP20 User Manual Page 7 of 42
A. Set Password
The default password, when shipped from the factory, is “controls”, all lower
case. The password is used to access all configuration screens.
Using the web browser-
1) From the Home Page, click on the “System” link. The System page will be
displayed.
2) Click on “Set Password”. The Set Password page will be displayed.
3) In the “Old password” entry box, enter the current password.
Note- When shipped from the factory, the default password is “controls”, all
lower case.
4) Enter the new password in the “New Password” entry box.
5) Enter the new password in the “Verify New Password” entry box.
6) Click on “Save” to save the new password.
OR
Click on “Cancel” to exit without changing the password.
Note- If the “New Password” entry and the “Verify New Password” entry do
not match, an error will be displayed.