DNF Controls CP20 - Manual (Page 21)

Flex Control Network ® , CP20 User Manual Page 17 of 42
4. Setup menu.
Press the [MENU] key and turn the wheel clockwise to select the setup item. Then
press a {Softkey} to choose the option or use the Keypad to enter a value.
Press Softkey or
Turn the wheel {VTR}: To reassign channel #:
Press {<-} or {->} to view available devices.
Press {SEL} to assign device to channel #1.
To GANG all available channels:
Press {GANG} to gang all available
channels to channels.
Status is from device assigned to channel
#1.
Press [MENU], then {VTR}, then
{
UNGANG} to release the gang function.
Turn wheel to make other menu selections.
VERSION NUMBER Shows model number and Software version number.
SYSTEM LABEL This field shows the control panel name assigned
through the browser application.
REC: {LOCKOUT}: Record function is disabled.
CRASH: Record function will use CRASH MODE for
recording.
{ASSEMBLE}: Record function will use ASSEMBLE
MODE for recording (not available on all protocols).
{INSERT}: Record function will use INSERT MODE for
recording (not available on all protocols).
WIND MODE: {LATCH}: The fast wind button function will remain
active until another motion button is pressed.
{HOLD}: The fast wind button function will cease as
soon as the fast wind button is released.
{SPEED}: Press softkey to set the maximum fast
wind speed.
SYSTEM ID: Not changeable
` Select LOCAL or GLOBAL then press the {YES} key to
clear all CUE points on the selected unit. Press the
{NO} key to not clear the CUE points.
GET GLOBAL CUES Select {GET} to Pull GLOBAL CUE LIST from Cue List.