Digi CM User Manual
Page 89
Configuring Remote Dial-In Access
Chapter 11
89
4. Select Dial-in terminal server for the Host mode from the drop down menu.
5. Fill in the appropriate fields as they apply to your configuration.
Destination IP -
The IP address of the system that you will be automatically
connected to when you access the port.
Destination port -´
The TCP port that will be used when the port you
accessed is automatically connected to a system on the network.
Protocol -
The protocol that will be used to establish the connection to
Destination IP: port. The options are SSH, RawTCP, and Telnet.
Inactivity timeout
- The timeout length ranges from 1 to 3600 seconds; 0 is
unlimited timeout.
Modem init string
- Use the default string or enter your own string.
6. Click
Save & apply
.