Digi CM - Manual (Page 28)

Adding a Network Card
28 Chapter 3
4. Click Configure the detected card.
The following fields appear on the configuration page.
— ATA/IDE Fixed Disk Card configuration
Total data size to be used - Enter the amount of memory you want to assign to
the compact-flash card for configuration files.
Delete all files in ATA/IDE Fixed Disk Card - Select the Delete button to clear the
compact-flash card of all files.
Format ATA/IDE Fixed Disk Card. - The options are EXT2 or FAT formats.
Select the format option and then select the Format button.
— Automatic Backup/Restore Configuration
Automatically backup configuration - Choose Yes to enable and No to disable
automatic backup.
Restore previously saved configuration - Click Restore to import the previously
saved configuration.
Restore currently saved configuration - Click Restore to import the most
recently saved configuration.
5. Enter the appropriate parameters on the configuration page.
6. Click Save to flash or Save & apply .
Adding a Network Card
To install and configure a network card on the Digi CM, do the following.
1. Insert the card into the PC slot.
2. Access the web interface.
3. Under the PC card heading, click Configuration.
Note: The card is automatically discovered and a configuration menu is displayed.
Always select the
Stop card
service button
and Save & apply
before removing
the PC card.