Digi CM - Manual (Page 119)

Command Line Interface
Chapter 15 119
Config Files
All config files are in /tmp/cnf and /tmp/cnf subdirectories. The following table
lists the filenames and a brief description.
File Name Description
active_detect Active auto detection of serial devices
chap-secrets Chap authentication information when using “PPPoE”
client.pem Web certificate
./cluster/cluster.conf Cluster “Master” port information
./cluster/unit#.conf Cluster “Slave” port information
.cnfversion
Version of current configuration. Used for TFTP
update only
dhcpd.opt DHCPD information
./digi/digi.cnf
Auto Backup configuration via the PC Flash Card
stored automatically
ez-ipupdate.conf “Dynamic DNS” information for IP assigning
group User group information
host.cnf Host name look up order
hosts Host name table
interfaces
Basic loopback (lo) and ethernet interface (eth0)
information (IP, gateway, etc)
krb5.conf Kerberos information
./keywords Keywords for alert configuration
./menu All custom menu information, .xml files
pap-secrets PAP auth via PPPoE
passive.detect Passive auto detection of serial devices
passwd User password file
./power/power.cnf Power management configuration
pppoe.conf Config file for PPPoE
redirect.cnf Basic port and portaccessmenu config information
resolv.conf DNS information
server.pem Private key for SSH with key certification information
shadow Secure password file