Digi CM - Manual (Page 72)

Default Menu
72 Chapter 8
4. Choose Apply .
5. Repeat this procedure to add more menu items.
Note: To add or configure submenus, select the Submenus hyperlink on the Menu
Configuration page.
Assigning Users to a Menu
Once a menu has been created, users can be assigned to the menu by doing
the following:
1. Access the web interface.
2. Configuration > Custom Menu > Menu Users .
A list of available users is displayed.
3. Choose a menu for a user by selecting a menu from the drop down
Assigned Menu list.
4. Choose Save & apply .
Default Menu
Port Access Menu
The PortAccess menu is a flat (one level) menu showing all ports, port titles
and the mode of each port.
Using the PortAccess menu you have a complete overview of all ports and can
initiate a connection to any of them.
When you choose to connect to a specific port, you are prompted again for the
username and password.