Digi CM - Manual (Page 78)

Accessing the Windows Server 2003 Console Port from the Digi CM GUI
78 Chapter 9
Accessing the Windows Server 2003 Console Port from the Digi CM GUI
To access the Windows Server 2003 console port, do the following:
1. Access the web interface.
2. Choose Serial port > Connection.
A screen similar to the following appears.
3. Click on the title of the port to which the Windows Server 2003 console port
is connected.
Note: If support for "Windows Server 2003" and "Rackable Systems Management Card"
is selected a menu will appear and you must choose between the two functions.
A screen similar to the following appears.
4. Use the Digi CM GUI to perform SAC functions. The following table
describes attributes of the controls on the GUI.