Digi CM - Manual (Page 125)

Configuration Menu
Chapter 16 125
3. Configure the card by choosing Change card configuration.
Note: The system searches for the card and displays information on the product model
number and type of card.
4. Use the ESC key to back out to the main configuration menu.
5. Choose Save Changes.
Host Mode Configuration
1. Access the configuration menu.
2. Choose Serial Port Configuration > an individual port number or 0 (zero) for
all ports > Host Mode Configuration.
3. Enter the desired parameters for each menu item.
4. Use the ESC key when all parameters are entered to return to the main menu.
5. Choose Save changes.