Digi CM User Manual
Page 24
Configuring for SSH
24
Chapter 2
4. Select SSH as the Port access menu protocol.
5. Click
Save & apply
.
Configuring a Port for SSH
1. Access the web interface.
2. Log in as root, admin, or a member of the port administration group. The
default password for root is
dbps
, and the default password for admin is
admin
.
3. Under Serial port > Configuration.
4. Select All or one individual port you want to configure for SSH.
5. Click Host mode configuration.
6. Specify SSH as the Protocol as shown in the following screenshot.