Digi CM - Manual (Page 34)

Enabling Log Storage Location
34 Chapter 5
Enable/Disable encrypted secondary NFS server - If secondary server supports
encrypted NFS server
Encrypted secondary NFS server user - User name
Encrypted secondary NFS server password - Password
Confirm secondary NFS server password - Repeat password
3. Choose Enabled.
4. Enter the IP address of the primary and secondary (if applicable) NFS
server and the mounting path of each.
5. Click Save & apply .
Enable SYSLOG Server
To enable the Digi CM for system or port logging on a syslog server, do the
following:
1. Access the web interface.
2. Under the Network heading, click SYSLOG server configuration.
3. Choose Enable.