Snmp, Snmp -56, Figure 2-39 access dialog -56 – Comtech EF Data CDM-570/L Vipersat Parameter Editor User Manual
Page 72
Admin
2-56
CDM-570/L, CDD-56X Parameter Editor User Guide
Figure 2-39 Access dialog
For detailed use and explanation of the unit’s access features, please refer to the
section “Access Lists Page” in the unit’s user documentation.
SNMP
Clicking the SNMP menu item displays the dialog shown in figure 2-40. The
Simple Network Management Protocol (SNMP) is an application-layer protocol
designed to facilitate the exchange of management information between
network devices. The Vipersat unit’s SNMP agent supports both SNMP v1 and
v2c.
Note: For proper SNMP operation, the Vipersat unit’s MIB files must be used
with the associated version of the unit’s base modem M&C and the IP
Controller’s SW. Please refer to the Vipersat unit’s documentation for
information on the required FW/SW compatibility.
NOTE