Home state, Home state -52 – Comtech EF Data CDM-570/L Vipersat Parameter Editor User Manual
Page 68
Vipersat
2-52
CDM-570/L, CDD-56X Parameter Editor User Guide
Home State
A Vipersat unit’s Home State consists of those parameters which provide a
known RF configuration that the unit will return to, either as the result of a
command by the VMS, or as it comes back on line from a reset or a power
cycle. These Home State settings are typically selected so that the unit goes to a
configuration which is optimum for its function in the network.
Figure 2-34 Home State, Enable STDMA
Figure 2-35 Home State dialog, Modulator
The Home State menu items allow enabling STDMA, Home State, and Carrier,
and setting the unit’s Transmit and Receive frequencies, data rates, coding rates,
modulation types, and power level (Transmit only) which are applied at boot-
up.