Comtech EF Data CDM-570/L Vipersat Parameter Editor - Manual (Page 71)

Chapter 2 - Using Parameter Editor 2-55
Admin
Figure 2-37 Authentication dialog
For security purposes, the Admin password must be entered before any changes
are allowed. Clicking the OK button will enable the User Names and Passwords
fields, as shown in figure 2-38.
Figure 2-38 Admin dialog, Enabled
Enable Ping Reply
Select this check box to have this unit reply to Ping requests.
Enable Telnet
Select this check box to allow a telnet connection to this unit.
Telnet Inactivity Timeout
Enter the time, in minutes, of inactivity before a telnet session times out and is
disconnected from this unit.
Access
The Access dialog allows controlling access to the Vipersat unit by defining up
to four IP and subnet client addresses which are allowed to access the modem.
Restricting access to the unit requires that the Access Enforcement check box
be selected. If this box is checked, only those units with listed Access Client’s
IP addresses can access this modem. All other units will be denied access.