Comtech EF Data CDM-570/L Vipersat Parameter Editor - Manual (Page 43)

Chapter 2 - Using Parameter Editor 2-27
Vipersat
Vipersat
Note: If the Vipersat feature (FAST code) has not been purchased for this
modem, the Vipersat menu item will not be displayed.
Clicking the Vipersat menu item displays the dialog shown in figure 2-20. This
parameter set is used to configure the modem unit with the function (role) it is to
perform in the Vipersat network and to assign associated attributes.
Figure 2-20 Vipersat dialog, Hub Unit
Role Designation
A Comtech modem/router is a flexible network component able to perform
different functions, depending on how it is used in a network. Table 2-3 lists
some typical network functions and the corresponding network role a modem
unit must have to perform its functions.
Using the radio buttons in the Role Designation box shown in figure 2-20, the
modem/router can be configured to function as a Hub or as a Remote.
In addition, the unit can be designated as an Expansion Unit for either a Hub
(switched) or a Remote (mesh) by selecting the check box. This configures the
NOTE