Comtech EF Data DMD2401/DMD2401L - Manual (Page 98)

DMD2401/DMD2401L/DMD2401 IBS/IDR Satellite Modem User Interfaces
TM065 - Rev. 3.3 4-59
<1>
<1>
<2>
<1>
<1>
<1>
<1>
<1>
<1>
<1>
<1>
<1>
<1>
<1>
Scrambler
Control
Scrambler Type
Transmit Power
Level
Differential
Encoder
Carrier Control
Carrier Selection
Spectrum
Operating Mode
Clock Control
Clock Polarity
SCT Source
Alarm 1 Mask
Major Alarm
Alarm 2 Mask
Minor Alarm
Common Alarm
Mask
0 = Off, 1 = On
0 = None
1 = IBS Scrm.
2 = V35_IESS
3 = V35_CCITT
4 = V35_EFDATA
7 = Reed-Solomon Scrm.
8 = V35_EFRS
Signed value. -50 to -300 (-5.0 to -30.0 dBm), Implied Decimal
Point
0 = Off, 1 = On
0 = Off, 1 = On, 2 = Auto, 3 = VSat, 4 = RTS
0 = Normal, 1 = CW, 2 = Dual, 3 = Offset
0 = Normal, 1 = Inverted
0 = Normal, 1 = 2047 Test
0 = Internal (SCT), 1 = External (SCTE)
0 = Normal, 1 = Inverted, 2 = Auto
0 = Internal, 1 = SCR, 2 = Ext. BNC
Bit 0 = Transmit Processor Fault
Bit 1 = Transmit Output Power Level Fault
Bit 2 = Transmit Oversample PLL Lock Fault
Bit 3 = Composite Clock PLL Lock Fault
Bit 4 = IF Synthesizer Lock Fault
Bit 5 = Transmit FPGA Configuration Alarm Fault
Bit 6 = Transmit Forced Alarm
Bit 7 = External Reference PLL Lock Fault
(0 = Mask, 1 = Allow)
Bit 0 = Terrestrial Clock Activity Detect Fault
Bit 1 = Internal Clock Activity Detect Fault
Bit 2 = Tx Sat Clock Activity Detect Fault
Bit 3 = Tx Data Activity Detect Fault
Bit 4 = Terrestrial AIS (Tx Data AIS Detect Fault)
Bit 5 = Transmit Ext BNC Clock Activity Detect Fault
Bit 6 = Transmit Reed-Solomon Fault
Bit 7 = Tx BUC Fault, LBST Only
(0 = Mask, 1 = Allow)
Bit 0 = -12 V Alarm
Bit 1 = +12 V Alarm
Bit 2 = +5 V Alarm
Bit 3 = Temperature Fault
Bit 4 = Interface FPGA Fault
Bit 5 = Battery Fault