Comtech EF Data DMD2401/DMD2401L User Manual
Page 59

User Interfaces
DMD2401/DMD2401L/DMD2401 IBS/IDR Satellite Modem
4-20
TM065 – Rev. 3.3
4.2.7 System Menu Options and Parameters
Control Mode:
{Front Panel, Terminal, Computer}
Allows the user to select the active control source.
General (menu):
Date:
{YY MMM DD}
Displays, and allows the user to enter the current date.
Time:
{HH:MM:SS}
Displays, and allows the user to enter the current time.
Backlight (menu):
Level:
{High, Low}
Allows the user to enter the backlight intensity level.
Timeout:
{00 - 99}
Allows the user to enter the length of time in seconds of
keyboard inactivity before the backlight shuts off. 00 =
no timeout.
Key Click:
{On, Off}
Allows the user to enable/disable the audible click heard
each time a key is pressed.
F0XXXXNN:
Version X-X
Displays the current firmware revision (where F0XXXX is
the Radyne ComStream part number, and NN is the
Radyne ComStream revision number).
Firmware Rev. (menu):
FPGA #1:
{F0XXXXNN, Not Present}
Indicates whether or not the firmware (where F0XXXX is
the Radyne ComStream part number, and NN is the
Radyne ComStream revision number) is present.
FPGA #2:
{F0XXXXNN, Not Present}
Indicates whether the firmware is present.
Tx CPLD:
{F0XXXXNN, Not Present}
Indicates whether the firmware is present.
Rx CPLD:
{F0XXXXNN, Not Present}
Indicates whether the firmware is present.
Intf CPLD:
{F0XXXXNN, Not Present}
Indicates whether the firmware is present.
Intf TxDSP:
{F0XXXXNN, Not Present}
Indicates whether the firmware is present.
Intf RxDSP:
{F0XXXXNN, Not Present}
Indicates whether the firmware is present.