Paxar Monarch 9850 - Manual (Page 93)

L7. thickness Using the chart below for reference, write the desired line
thickness (1 to 99) in box L7. Measured in dots.
NOTE: Line thickness fills upward on horizontal lines, or to
the right on vertical lines.
L8. "pattern" Line pattern. Enter "".
Example L,S,110,30,110,150,10,"" p
Defines a horizontal line field as a segment starting at row 110,
column 30 and ending at row 110, column 150. The line
thickness is 10 dots.
D e f i n i n g B o x F i e l d s
Use boxes to form borders or highlight items of interest. Define
each box field separately. This field is not assigned a field
number, but is counted as a field (keep this in mind, as the printer
allows a maximum of 1000 fields or 100 for 9403 printer per
format). You can define any line length and a thickness up to 99
dots, as long as the solid black print does not exceed 30 percent
of any given square inch of the label.
Defining Fields 3-27