Paxar Monarch 9850 - Manual (Page 101)

One-Inch Feed Length Guidelines
When using RFID supplies with a one-inch feed length, follow
these guidelines:
◆ Adjust the supply and print positions according to the table in
the RFID Printer’s Quick Reference, provided with your RFID
printer.
◆ Do not use peel mode, enable backfeed, or select overstrike
for the error action mode.
◆ Do not use the verifier with one-inch feed supplies.
◆ A non-print zone exists at the trailing edge of each label,
according to the table in the RFID Printer’s Quick Reference.
The trailing edge is the edge of the label that exits the printer
last; regardless of how the format is designed on the label.
Trailing Edge
Leading Edge
Non-Print
Zone Varies
4" wide by 1" tall RFID Label
Defining Fields 3-35