Paxar Monarch 9850 - Manual (Page 167)

E8. ver_mode Verifier Mode. Enables or disables the verifier. Not all the
printers support a verifier. Options:
0 Disable verifier - not using a verifier. (default)
Use for 9403 printer.
1 Enable verifier
NOTE: For more information about enabling the verifier, refer
to the Verifier’s Operating Instructions.
E9. cable_det Verifier cable detect. The printer can be set to detect when a
cable is disconnected. Options:
0 The printer does not detect when a cable is
disconnected (default)
1 I/O cable is disconnected
2 I/O and/or data cables are disconnected
NOTE: For more information about connecting the verifier’s
cables, refer to the Verifier’s Operating Instructions.
Example E,0,1,4,2,1,4,1,2 p
Defines a batch control field. Continuous feed mode is used
and a separator prints between batches. Four tags have the
same image and there are two identical parts on one tag. The
knife cuts after every four tags. A verifier is enabled and the
printer detects when either the I/O or data cables are
disconnected.
Printing 6-7