Paxar Monarch 9850 User Manual
Page 204
283
ENQ Trailer string is too long. Use a maximum of 3
characters.
284
The buffer type must be T (Transmit), R (Receive), I
(Image), F (Format), or D (Downloadable Fonts).
285
The storage device type in the memory configuration
packet must be N (non-volatile RAM) or R (volatile
RAM).
286
The buffer size is invalid.
287
The printhead width must be 0.
288
The battery voltage must be 0 (15-volt battery) or 1
(12-volt battery).
289
The printer address specified in the communication
settings packet must use exactly six characters.
290Action must be 0 (disable), 1 (enable), or 2 (extended)
for the backfeed control packet or the printer is active.
291
Dispense position must be 50 to 200 dots or the printer
is active.
292
Backfeed distance must be 10 to 200 dots or the printer
is active. The backfeed distance can not be greater
than the dispense position.
293
The skip index selection defined in the field must be 0
(disabled) or 1 (enabled). Correct the packet and
resend to the printer.
294
The verifier mode must be 0 (disable) or 1 (enable).
295
The verifier’s cable detect mode must be 0 (no detect),
1 (I/O cable detect), or 2 (I/O and data cable detect).
310Check digit scheme number must be 1 to 10.
311
Modulus must be 2 to 11.
8-14 Diagnostics and Errors